<div>Hi Group,</div>
<div> </div>
<div>Having some problems with a master AIV with the 6502 co-pro card and SCSI card fitted. I can't get the machine to boot, but the power light comes on ok. One problem I found unpacking the machine is the moulded power plug was cracked, and one of the pins bent. Looks like the machine was dropped heavily on route, and landed on the plug bending the pin.
</div>
<div> </div>
<div>Having problems booting the machine, have left it switched on for about an hour, and noticed the power supply seemed much hotter compared to a standard master. The case near the power supply feels warm and touching the plate near the power switch feels hot. Is this normal for a domesday master, have heard about heating problems, but did not expect the power supply to feel so hot.
</div>
<div> </div>
<div>Could it be something to do with bent pin on the power socket, in hindsight I should not have plugged it in with that plug, but was eager to see if the computer was ok. I paid a fair amount for the machine and really hacked off Royal Mail have mishandled it, was sent special delivery too, having a bad day.
</div>
<div> </div>
<div>Paul.</div>
<div> </div>
<div> </div>